How should I use this display and the available drivers? I've been trying to use it with the Adafruit_ILI9341 library and I only get a white screen.

How should I use this display and the available drivers? I've been trying to use it with the Adafruit_ILI9341 library and I only get a white screen.

Does it support reading from screen RAM? Thanks

Does it support reading from screen RAM? Thanks

Is the screen touch sensitive to fingers?

Is the screen touch sensitive to fingers?

Is it RoHS compliant ? And if yes where I can find the certificate ?

Is it RoHS compliant ? And if yes where I can find the certificate ?

how can I use the touch with a EP32 - is there somewhere an example do use the TFT and the touch with Arduino IDE. In the download file from Banggood I see only a st Board.

how can I use the touch with a EP32 - is there somewhere an example do use the TFT and the touch with Arduino IDE. In the download file from Banggood I see only a st Board.

please, in this is PCB8544 or MI0283QT9A or what ???

please, in this is PCB8544 or MI0283QT9A or what ???

Struggling to get this to work with the mega, any instructions or advise?

Struggling to get this to work with the mega, any instructions or advise?

Tested literally everything you can find on google about this screen. ALWAYS WHITESCREEN Adafruit_ILI9341.h graphicstest Serial output is: ILI9341 Test! Display Power Mode: 0x0 MADCTL Mode: 0x0 Pixel Format: 0x0 Image Format: 0x0 Self Diagnostic: 0x0 The screen is just not being recognized. Is this an error with my libraries or is this fking thing just broken? Spent 4h of my life and reached nothing - close to try solving the problem with a hammer.

Tested literally everything you can find on google about this screen. ALWAYS WHITESCREEN Adafruit_ILI9341.h graphicstest Serial output is: ILI9341 Test! Display Power Mode: 0x0 MADCTL Mode: 0x0 Pixel Format: 0x0 Image Format: 0x0 Self Diagnostic: 0x0 The screen is just not being recognized. Is this an error with my libraries or is this fking thing just broken? Spent 4h of my life and reached nothing - close to try solving the problem with a hammer.

can we use arduino with this?? does it have capacitive touch or resistive touch?

can we use arduino with this?? does it have capacitive touch or resistive touch?

What is the current drawn by this LCD? 15ma? 50ma? 120ma?

What is the current drawn by this LCD? 15ma? 50ma? 120ma?

will this work with NodeMCU esp8266 ?

will this work with NodeMCU esp8266 ?

What drivers should be used is using this with raspberry pi?

What drivers should be used is using this with raspberry pi?

Can you invoice for the product?

Can you invoice for the product?

A good tutorial for this with ESP32 or ESP8266? Thank you in advance

A good tutorial for this with ESP32 or ESP8266? Thank you in advance

Who has had success using this screen with ESP32? How did you wire it? What libraries and examples were used? Thank you in advance.

Who has had success using this screen with ESP32? How did you wire it? What libraries and examples were used? Thank you in advance.

a link where I can see what products you have for sale? thanks.

a link where I can see what products you have for sale? thanks.

you have TFT lcd panel model 59.05A03.016

you have TFT lcd panel model 59.05A03.016

Is there an eagle lbr file for this tft?

Is there an eagle lbr file for this tft?

Is there an eagle lbr for this product?

Is there an eagle lbr for this product?

Can this be used on raspberry pi, and if so, how?

Can this be used on raspberry pi, and if so, how?

Is this compatible with pyboard v1 (STM32F405)?

Is this compatible with pyboard v1 (STM32F405)?

Good afternoon, do you have a notbuk lg400 screen?

boa tarde , vcs tem tela do notbuk lg400?

which touch controller it has ?

which touch controller it has ?

Hi, I have this TFT SPI Touch Display ILI9341, program Arduino 1.6.5., and developement board STM32F103C8T6. And I need initialize the display.I have program, but all Power Mode, MADCTL Mode is 0xFF !!! on output.WHERE I HAVE PROBLEM ?????my code is :#include <Adafruit_GFX.h> // this line I have added#include "SPI.h"#include "Adafruit_GFX_AS.h"#include "Adafruit_ILI9341_STM.h"// For the Adafruit shield, these are the default.#define TFT_DC PA0 // (Green) #define TFT_CS PA1 // (Orange) #define TFT_RST PA2 // (Yellow)// STM32 - TFT// 5v - VCC// GND - GND// PA0 - DC// PA1 - CS// PA2 - RST// PA5 - SCK// PA6 - MISO// PA7 - MOSI// 5v - LED AAdafruit_ILI9341_STM tft = Adafruit_ILI9341_STM(TFT_CS, TFT_DC, TFT_RST); // Use hardware SPI void setup() { Serial.begin(115200); Serial.println("ILI9341 Test!"); tft.begin(); // read diagnostics (optional but can help debug problems) uint8_t x = tft.readcommand8(ILI9341_RDMODE); Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDMADCTL); Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDPIXFMT); Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDIMGFMT); Serial.print("Image Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDSELFDIAG); Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); Serial.println(F("Benchmark Time (microseconds)")); Serial.print(F("Screen fill ")); Serial.println(testFillScreen()); delay(500); Serial.print(F("Text ")); Serial.println(testText()); delay(3000); Serial.print(F("Lines ")); Serial.println(testLines(ILI9341_CYAN)); delay(500); Serial.print(F("Horiz/Vert Lines ")); Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));

Hi, I have this TFT SPI Touch Display ILI9341, program Arduino 1.6.5., and developement board STM32F103C8T6. And I need initialize the display.I have program, but all Power Mode, MADCTL Mode is 0xFF !!! on output.WHERE I HAVE PROBLEM ?????my code is :#include <Adafruit_GFX.h> // this line I have added#include "SPI.h"#include "Adafruit_GFX_AS.h"#include "Adafruit_ILI9341_STM.h"// For the Adafruit shield, these are the default.#define TFT_DC PA0 // (Green) #define TFT_CS PA1 // (Orange) #define TFT_RST PA2 // (Yellow)// STM32 - TFT// 5v - VCC// GND - GND// PA0 - DC// PA1 - CS// PA2 - RST// PA5 - SCK// PA6 - MISO// PA7 - MOSI// 5v - LED AAdafruit_ILI9341_STM tft = Adafruit_ILI9341_STM(TFT_CS, TFT_DC, TFT_RST); // Use hardware SPI void setup() { Serial.begin(115200); Serial.println("ILI9341 Test!"); tft.begin(); // read diagnostics (optional but can help debug problems) uint8_t x = tft.readcommand8(ILI9341_RDMODE); Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDMADCTL); Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDPIXFMT); Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDIMGFMT); Serial.print("Image Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDSELFDIAG); Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); Serial.println(F("Benchmark Time (microseconds)")); Serial.print(F("Screen fill ")); Serial.println(testFillScreen()); delay(500); Serial.print(F("Text ")); Serial.println(testText()); delay(3000); Serial.print(F("Lines ")); Serial.println(testLines(ILI9341_CYAN)); delay(500); Serial.print(F("Horiz/Vert Lines ")); Serial.println(testFastLines(ILI9341_RED, ILI9341_BLUE));

can i use keil? instead of Arduino ide.

can i use keil? instead of Arduino ide.

does it work with stm32. there is work around righ?

does it work with stm32. there is work around righ?

What does Jumper J1 do, on the v1.2 units?

What does Jumper J1 do, on the v1.2 units?

Is this the MSP2907 or the MSP2906

Is this the MSP2907 or the MSP2906

Will it work with Arduino UNO?

Will it work with Arduino UNO?

It works with Arduino YUn? Thank you

It works with Arduino YUn? Thank you