EdenFantasys Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Electronics
0Gustokoa

3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4B

4.0408
$13.69 / $16.70
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$7.65 / $16.70
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

Ordainketa Segurua Bermaturik

Opari Doan
Erosi eta opari doan lortu
Bidalketa Politika
Bidalketa estandarra doan $9.9tik gorako eskaeretan
Itzulketa Politika
Erositako elementuak itzuli daitezke 40 egunetan jasotako datatik aurrera. Pertsonalizatutako elementuak ezin dira itzuli edo aldatu. E-opari txartelarekin erositako elementuak trukatzeko soilik dira; itzulketak ez dira aplikagarri.

Opari Doan

Ongi etorri Roymallera, departamentu-dendako opari premiumak erosteko zure webgune profesionalera. Zure babesa oso estimatzen dugu eta eskerrak emateko, zure erosketetan zirrara gehigarria gehitu nahi dugu. Gurekin erosiz gero, zure bizimodua hobetzen duten kalitate handiko produktuak ez ezik, zure eskaera bakoitzarekin opari doan esklusiboa ere jasoko duzu. Prest gure bilduma arakatzeko eta zure opari perfektua aurkitzen? Arakatu gure departamentu-dendako elementuen hautapena, egin zure eskaera eta itxaron zure opari doana zure erosketarekin batera iristeko zirrara.

Bidalketa Politika

Zure eskaerak jaso ondoren, elementuak zuregana eramateko lan egingo dugu eta seguru iristen direla ziurtatuko dugu. Bidalketaren xehetasunak zure baieztapen mezu elektronikoan emango dira.Kasu gehienetan, eskaerak 2 egunetan prozesatzen dira.Baldintza berezietan, honela atzeratuko da: Larunbatean, igandean edo jaiegunetan eskaera egiten baduzu, 2 egun atzeratuko da..Normalean, 5-7 lan egun behar dira (astelehenetik ostiralera) hegaldiaren atzerapena edo beste ingurumen faktore batzuk eragin gabe..Gure bidalketa zerbitzua mundu osoan zehar delako, bidalketa denborak zure kokalekuaren araberakoak izango dira, beraz, zenbait aldiz beharko dituzu eta itxaron pazientziaz urrutiko barrutietan edo herrialdeetan bazaude.

1. Itzulketa eta Truke Politika

roymall.comtik erositako elementuak bakarrik onartzen ditugu. Gure tokiko banatzaileetatik edo beste saltzaile batzuetatik erosten baduzu, ezin dituzu gure aldetik itzuli. Azken salmentako elementuak edo opari doanak ez dira onargarriak itzulketarako. Itzulketarako hautagaia izan dadin, zure elementua erabili gabe eta jaso zeneko egoera berean egon behar du. Gainera, jatorrizko paketean egon behar du.Gurengandik itzulketa argibideak jaso ondoren, mesedez, bildu zure itzulitako elementuak eta utzi zure paketea posta bulego lokalean edo beste bidalketa batzuetan.
Zure itzulketako edo trukaketa elementua prozesatuko dugu 3-5 lan egunetan jasotakoan. Itzulketa prozesatu eta zure ordainketa metodo originalean kreditua automatikoki emango da.Ezin dira itzulketak edo trukeak onartu produktua pertsonalizatuta sortu bada, neurri pertsonalizatuak, kolore pertsonalizatuak edo inprimatze pertsonalizatuak barne.Laguntza gehiago behar duzu, jarri gurekin harremanetan. service@roymall.com edo Whatsapp: +8619359849471

2.Itzulketa Politika

Itzulitako paketea jasota eta egiaztatuta, itzulpen osoa edo dendako kredituaren %100 jasoko duzu. Itzulketa prozesatu eta zure ordainketa metodo originalean kreditua automatikoki emango da. Kontuan izan bidalketa kostuak eta edozein zerga edo kuota ez direla itzulgarriak. Bidalketa kostu gehigarriak ez dira itzulgarriak paketea bidali ondoren. Zuk ordaindu behar dituzu kuota hauek eta ezin ditugu bertan behera utzi edo itzuli, eskaera guregana itzuli arren.Behin itzulitako elementua jaso eta berretsi ondoren, mezu elektroniko bat bidaliko dizugu zure itzulitako elementua jaso dugula jakinarazteko. Zure itzulketaren onarpena edo ukapena ere jakinaraziko dizugu.Itzulketa prozesuari buruzko arazoren bat baduzu, jarri gurekin harremanetan. service@roymall.com edo Whatsapp: +8619359849471
Note: Raspberrry Pi is not included.
Introduction:
This is the dual use ABS case for 3.5 inch screen kit, suitable for Raspberry Pi 4 Model B.It is esay to install the case with screen and Raspberry Pi.When you use the Raspberry Pi with 3.5inch screen,please remove the cover of case;When you use Raspberry Pi with cooling fan,you needn"t remover the cover of case.
Note:The 3.5inch screen and cooling fan can"t be used at the same time.
If Raspberry Pi is equipped with GPIO display drivers,the HDMI port will have no signal output
Specifications:
Colour: Black
Material: ABS plastic
Size: 90*61*35
Applicable to: Raspberry Pi 4B
3.5-inch touch screen or fan that can install Raspberry Pi
Knowing that: 3.5-inch display and fan cannot be installed at the same time due to the PIN pin
3.5inch Touch Screen Features:
1. Physical resolution 320 x 480, with resistive touch control
2. With the refresh rate of raspberry pi around 50Hz, play video to play the game without pressure.
3. With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure
4. Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom
5. Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+ , 4B)
6. Support Raspbian/Ubuntu/Kali system, provide driver and image
7. WIKI for reference: raspberrypiwiki.com/index.php/3.5_inch_LCD_B
Note:
Please plug the screen on Raspberry Pi"s GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.
How to Use the Touch LCD
Step 1: Download the Raspbian image
https://www.raspberrypi.org/downloads/raspbian/
Step 2: Burn the system image to the SD card
https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3
Stop 3 : Connect the LCD to Raspberry Pi , insert the system SD card , connect the Ethernet and power on it
Step 4: Open terminal(SSH) and install the driver on RaspberryPi
(1)Execute the following commands (RaspberryPi needs to connect Internet):
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./MHS35-show
(2) After the above commands are executed, the system will automatically restart and be able to display and touch normally now.

Install LCD driver

sudo rm -rf LCD-showgit clone https://github.com/goodtft/LCD-show.gitchmod -R 755 LCD-showcd LCD-show/sudo ./LCD35-show
  • If Raspberry Pi is equipped with GPIO display drivers such as MPI2411, MPI2418, MPI2801, MPI3201, MPI3501, etc., the HDMI port will have no signal output
  • If you need to switch back to the HDMI display mode, execute:
cd LCD-show/sudo ./LCD-hdmi

Download LCD Driver Manually

  • Driver download

Download:File:LCD-show.tar.gz

Touch screen calibration

  • This LCD can be calibrated using a program called xinput_calibrator
  • Install it with the commands:
cd LCD-show/sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
  • Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
  • Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
  • You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
 /ect/X11/xorg.conf.d/99-calibration.conf
  • Save the touch parameters

About Dual Use ABS Case:
1. The Case made of ABS material,support to install 3.5 inch touch screen,and need to remove the cover of case. When you don"t use the 3.5 inch touchscreen , it is a general case with cooling fan.The 3.5inch screen and cooling fan can"t be used at the same time.
2. The case is design for Raspberry Pi 4 Model B , remain almost all interface such as USB , Ethernet , A/V , micro HDMI , SD card slot , display , camera( CSI). (Note: A1 case remain GPIO and POE hole , but A2 case does not remian)
3. Make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.
Package Included:
1 x ABS box case
1 x touch screen
1 x touch screen pen
Erosi Paypal-ekin
Electronics Ranking

3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4B

3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4B

3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4B

3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4B

3.5inch TFT 480*320 50FPS Touch Screen Display ABS Case Kit for Raspberry Pi 4B

Customer Reviews

4.80 out of 5
See all 59 reviews
Write a Review
  • All Reviews (59)
  • Image ( 1 )
  • Video (0)
  • All Star
    • All Star(59)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 08/02/2020


    I just received the box and not the screen

    Comments (0)
    Show Original
  • 11/02/2020

    I also received just the box and not the screen!

    Comments (0)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-8 of 8 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: Does this just work after assembling or do you have to use your own chip or soemthing?
      A:
      just plug and play no need to install anything
      Answered by Manish Kiran on 05/11/2021Helpful (0)
    • 0
      Q: how to calibrate the dimensions for the touch? my display works fine and shows the screen, but the touch is always on the wrong position. 🙁
      A:
      reinstall the drivers and check again
      Answered by Manish Kiran on 14/11/2021Helpful (0)
    • 0
      Q: is the screen included or only can?
      A:
      screen included with case
      Answered by Manish Kiran on 05/11/2021Helpful (0)
    • 0
      Q: is it compatible with the orange pi zero 2W?
      A:
      not support
      Answered by Silly Stuff on 20/01/2025Helpful (0)
    • 0
      Q: Will this work with Le Potato?
      A:
      suitable for Raspberry Pi 4 Model B.
      Answered by Pigfish on 30/01/2024Helpful (0)
    • 0
      Q: For me after the driver installation the flat white screen just changed to a flat greay screen, nothing is visible on it. What to do now ?
      A:
      sorry not sure for that, maybe you should follow the manual steps.
      Answered by Irredenta on 18/12/2023Helpful (0)
    • 0
      Q: cant get screen to display image even tried multiple different guides do i have a faulty unit
      A:
      The last command to type in is ' sudo .LCD35-show ' (with a slash between the dot and the LCD, but BG doesn't let me write it) instead of the one provided
      Answered by Gwenaël on 17/06/2020Helpful (0)
    • 0
      Q: How to install driver on Raspberry Pi 4b for this display?
      A:
      This does not work if you follow the product description... There is a comment where somebody said a waveshare link, the display started to work me, but the quality is wrong, there is less color, you cannot see whats on the screen, and I cannot calibrate the touchscreen to work. (I have an other LCD similar to this, but that was working better. Its far from 50fps with the waveshare driver. Do anybody knows a better driver? Or it is bad quality?
      Answered by hygyke on 16/09/2020Helpful (0)

    Nire Saskia Saskia (0)
    Nire Gogokoak Nire Gogokoak (0)

    Roymall Service