Roymall Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Electronics
0Gustokoa

UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module

4.2794
$19.99 / $24.39
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$15.99 / $24.39
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

Ordainketa Segurua Bermaturik

Opari Doan
Erosi eta opari doan lortu
Bidalketa Politika
Bidalketa estandarra doan $9.9tik gorako eskaeretan
Itzulketa Politika
Erositako elementuak itzuli daitezke 40 egunetan jasotako datatik aurrera. Pertsonalizatutako elementuak ezin dira itzuli edo aldatu. E-opari txartelarekin erositako elementuak trukatzeko soilik dira; itzulketak ez dira aplikagarri.

Opari Doan

Ongi etorri Roymallera, departamentu-dendako opari premiumak erosteko zure webgune profesionalera. Zure babesa oso estimatzen dugu eta eskerrak emateko, zure erosketetan zirrara gehigarria gehitu nahi dugu. Gurekin erosiz gero, zure bizimodua hobetzen duten kalitate handiko produktuak ez ezik, zure eskaera bakoitzarekin opari doan esklusiboa ere jasoko duzu. Prest gure bilduma arakatzeko eta zure opari perfektua aurkitzen? Arakatu gure departamentu-dendako elementuen hautapena, egin zure eskaera eta itxaron zure opari doana zure erosketarekin batera iristeko zirrara.

Bidalketa Politika

Zure eskaerak jaso ondoren, elementuak zuregana eramateko lan egingo dugu eta seguru iristen direla ziurtatuko dugu. Bidalketaren xehetasunak zure baieztapen mezu elektronikoan emango dira.Kasu gehienetan, eskaerak 2 egunetan prozesatzen dira.Baldintza berezietan, honela atzeratuko da: Larunbatean, igandean edo jaiegunetan eskaera egiten baduzu, 2 egun atzeratuko da..Normalean, 5-7 lan egun behar dira (astelehenetik ostiralera) hegaldiaren atzerapena edo beste ingurumen faktore batzuk eragin gabe..Gure bidalketa zerbitzua mundu osoan zehar delako, bidalketa denborak zure kokalekuaren araberakoak izango dira, beraz, zenbait aldiz beharko dituzu eta itxaron pazientziaz urrutiko barrutietan edo herrialdeetan bazaude.

1. Itzulketa eta Truke Politika

roymall.comtik erositako elementuak bakarrik onartzen ditugu. Gure tokiko banatzaileetatik edo beste saltzaile batzuetatik erosten baduzu, ezin dituzu gure aldetik itzuli. Azken salmentako elementuak edo opari doanak ez dira onargarriak itzulketarako. Itzulketarako hautagaia izan dadin, zure elementua erabili gabe eta jaso zeneko egoera berean egon behar du. Gainera, jatorrizko paketean egon behar du.Gurengandik itzulketa argibideak jaso ondoren, mesedez, bildu zure itzulitako elementuak eta utzi zure paketea posta bulego lokalean edo beste bidalketa batzuetan.
Zure itzulketako edo trukaketa elementua prozesatuko dugu 3-5 lan egunetan jasotakoan. Itzulketa prozesatu eta zure ordainketa metodo originalean kreditua automatikoki emango da.Ezin dira itzulketak edo trukeak onartu produktua pertsonalizatuta sortu bada, neurri pertsonalizatuak, kolore pertsonalizatuak edo inprimatze pertsonalizatuak barne.Laguntza gehiago behar duzu, jarri gurekin harremanetan. service@roymall.com edo Whatsapp: +447549870296

2.Itzulketa Politika

Itzulitako paketea jasota eta egiaztatuta, itzulpen osoa edo dendako kredituaren %100 jasoko duzu. Itzulketa prozesatu eta zure ordainketa metodo originalean kreditua automatikoki emango da. Kontuan izan bidalketa kostuak eta edozein zerga edo kuota ez direla itzulgarriak. Bidalketa kostu gehigarriak ez dira itzulgarriak paketea bidali ondoren. Zuk ordaindu behar dituzu kuota hauek eta ezin ditugu bertan behera utzi edo itzuli, eskaera guregana itzuli arren.Behin itzulitako elementua jaso eta berretsi ondoren, mezu elektroniko bat bidaliko dizugu zure itzulitako elementua jaso dugula jakinarazteko. Zure itzulketaren onarpena edo ukapena ere jakinaraziko dizugu.Itzulketa prozesuari buruzko arazoren bat baduzu, jarri gurekin harremanetan. service@roymall.com edo Whatsapp: +447549870296
UNO R3 ATmega328P Board:
Description:


UNO R3 board is 100% compatible with original , now it has perfect quality and performance .
is an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
This is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Note:

The TOSduino Uno R3 requires the 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have 1.0 installed on that machine.
The small chip is ATmega16U2, the 28 pin DIP socket chip is ATmega328-pu.



2.8 Inch LCD Display Feature:
Description:

2.8 inch LCD TFT display
Bright, 4 white-LED backlight
Colorful, 18-bit 262,000 different shades
4-wire resistive touchscreen 240 x 320 pixels with individual pixel control
No wiring, no soldering.
Simply plug it in and load library
On-board 3.3V 300mA LDO regulator
5V compatible, use with 3.3V or 5V logic
Support 2GB micro SD TF card
Size: 7.8 x 5.3cm

Package included:

1 x 2.8 Inch TFT LCD Shield Touch Display Module
1 x UNO R3 ATmega328P Board with USB cable









Electronics Ranking
UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module,UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module,UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module,UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module

Customer Reviews

4.80 out of 5
See all 63 reviews
Write a Review
  • All Reviews (63)
  • Image ( 1 )
  • Video (0)
  • All Star
    • All Star(63)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 05/07/2017

    Both board and display are quite nice. What I really like is that this board have replaceable chip, so you can use ti to program ATmega 328 chips: https://goo.gl/n3VbEX

    Comments (0)
    Show Original
  • 01/11/2015

    After 4 weeks i finally had my hands on this product. But it was not easy to let it work.
    So found the good driver!!

    When you know the driver you can easily let it work. For me i found it after 2 days. So this have i done. At the back on my module stand with black marker 68090 it seem to stand for the diver RM68090 but under that name you can not found it. So after hard google. i found on another site that the RM68090 is similar on the ILI9325 so when you get the unkown driver error try this one. And change the code to:
    if(identifier == 0x9325) {
    Serial.println(F("Found ILI9325 LCD driver"));
    } else if(identifier == 0x9328) {
    Serial.println(F("Found ILI9328 LCD driver"));
    } else if(identifier == 0x7575) {
    Serial.println(F("Found HX8347G LCD driver"));
    } else if(identifier == 0x9341) {
    Serial.println(F("Found ILI9341 LCD driver"));
    } else if(identifier == 0x8357) {
    Serial.println(F("Found HX8357D LCD driver"));
    } else {
    Serial.print(F("Unknown LCD driver chip: "));
    Serial.println(identifier, HEX);
    identifier = 0x9325;
    }

    And download the normal library from adafruit
    link:
    https://github.com/adafruit/TFTLCD-Library

    And maybe you must rotate the lcd for the correct touch. And mirror it.
    Rotate can be with comment:
    tft.setRotation(1)

    And mirror i had do with the follow:


    p.x = map(p.x, TS_MINX, TS_MAXX, 240, 0);//default is (240, 0) [default puts touch cord. 0=x/y upper right.
    p.y = map(p.y, TS_MINY, TS_MAXY, 0, 320);//default is (320, 0) [I change these cause i like 0=xy bottom left.

    I switch the 0 , 240 to 240 ,0 for it.

    Enjoy this nice product i upload a picture later.

    Comments (2)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-2 of 2 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: Does the touch screen comes with a stylus?
      A:
      includes.
      Answered by Quenelle on 10/07/2021Helpful (0)
    • 0
      Q: Hi, can I bye it with Arduino Mega insteed Arduino Uno?
      A:
      I think you can buy a 2.8 Inch TFT Touch screen and Arduino Mega separately.
      Answered by lizgo on 21/12/2017Helpful (0)

    Nire Saskia Saskia (0)
    Nire Gogokoak Nire Gogokoak (0)

    Roymall Service